Crank Options:
Fixed cranks can be supplied in various lengths; an additional charge may apply - call for details.
Adjustable cranks can be supplied in various lengths - call for details.
Bearing Options:
Bearings can be supplied with various lube options - call us for availability.
Diaphragm Elastomer Options:
Pumps diaphragms can be supplied as Neoprene, Viton, Teflon, EPDM, Buna-N and other elastomers. Additional charge applies except for Neoprene. Extended lead times may apply except for Neoprene, Viton and EPDM.
Lead Options:
15" lead length is standard. Other lead lengths can be supplied.
Leads with Teflon insulation, connectors and/or sleeving can be supplied.
Fittings:
See the "Fittings" page in the Accessories Section.
Pump Head Orientation:
Pumps will be shipped with standard orientation unless otherwise specified. No additional charge will apply.
Pump Body Options:
| Pump Body Options
|
| Type No
|
Port Type
|
Port Orientation
|
Port Spacing
|
Port Length
|
| Type 1
|
3/16" push on flexible tubing; .25" OD
|
Straight
|
.59" centers
|
.25"
|
| Type 2 (Standard)
|
3/16" push on flexible tubing; .25" OD
|
Straight
|
.59" centers
|
.50"
|
| Type 3A
|
1/4" x 28 threaded ports; .41" OD
|
Straight
|
.59" centers
|
.35" with .19" deep female threads
|
| Type 3B
|
10-32 threaded ports; .41" OD
|
Straight
|
.59" centers
|
.35" with .19" deep female threads
|
| Type 3C
|
1/16"-27 NPT ports; .41" OD (special order)
|
Straight
|
.59" centers
|
.35" with .19" deep female threads
|
| Type 4A
|
1/4" x 28 threaded ports; .37" OD
|
90 degree threaded
|
(n/a)
|
.19" deep female threads
|
| Type 4B
|
10-32 threaded ports; .37" OD
|
90 degree threaded
|
(n/a)
|
.19" deep female threads
|
| Type 4C
|
1/16"-27 NPT ports; .37" OD (special order)
|
90 degree threaded
|
(n/a)
|
.19" deep female threads
|
|
|
|
|
|
|
| Pump bodies can be supplied in molded Delrin, Celcon, glass filled polypropylene or polyethylene or in black anodized machined aluminum. The standard is Delrin, other plastics may be available; an additional charge will apply.
|
| Pump heads are symmetrical and may be mounted over the diaphragm in any of the four radial positions. Standard is with the inlet up.
|